Welcome to Separ UK

 swk200010transWe are the largest fuel polishing and fuel filtration supplier in Europe, supplying fuel filtration and preservation equipment to the generator, marine, building services, truck, bus, and heavy equipment markets since the 1980s.

 

Need to order spares?

01830 small cropped 2

Please call us on 01923 276 007 or email This email address is being protected from spambots. You need JavaScript enabled to view it.


Contact Us Tab          

W-705

WASP W7xx fuel filter/water separator range

WASP Fuel Filters offer a new cost effective range of primary filtration equipment for Marine, Industrial and Transport applications.

The problems that can occur due to water and sediment in fuel are well known and WASP Filters offer a wide choice of options to cover most requirements.

 

Overview 

  • Up to 20000 litres per hour flow rate
  • 1/4'' to 2'' BSP connections
  • Inexpensive solution
  • Choice of separators, paper elements or long life stainless steel
  • LM6 grade aluminium filter heads with reversible stainless steel bracket & bolts
  • Powder coated aluminium filter heads for corrosion prevention & long service life
  • 60 & 100 micron stainless steel washable elements
  • Option of 300 and 400 micron elements on some units

 

How does it work?

 1. Separation:  

The incoming flow of fuel oil changes velocity and direction, reducing the possibility of further reduction of any water droplets present through impact. 

2.  Coalescence:   

This takes place on and just below the flow dispersion member allowing the separated water to descend to the bottom of the filter bowl. 

3. Filtration:   

The fuel finally passes through the stainless steel filter element. This removes all particulate above 100 micron still suspended in the fuel after the separation process.

 

 

Product Range

 

W-7050x range Filtration (microns) Details
W-70501/006 60mic stainless steel 1” Ports, Metal bowl
W-70501/01 100mic stainless steel
W-70501/03 300mic galvanised steel
W-70502/006 60mic stainless steel 1 ¼” Ports, Metal bowl
W-70502/01 100mic stainless steel
W-70502/03 300mic galvanised steel
W-70503/006 60mic stainless steel 1 ½” Ports, Metal Bowl
W-70503/01 100mic stainless steel
W-70503/03 300mic galvanised steel
W-70504/006 60mic stainless steel 2” Ports, Metal Bowl
W-70504/01 100mic stainless steel
W-70504/03 300mic galvanised steel

 

Spares and Options for W-70501, 70502, 70503 

W-70500B W-7050x range mounting bracket
W-60500/006 Replacement 60 mic pleated stainless steel element
W-60500/01 Replacement 100 mic pleated stainless steel element
W-60500/03 Replacement 300 mic pleated galvanised steel element
W-3197 Gasket kit
W-3197V Viton gasket kit

 

Spares and Options for W-70504 

W-70500B W-7050x range mounting bracket
W-60504/006 Replacement 60 mic pleated stainless steel element
W-60504/01 Replacement 100 mic pleated stainless steel element
W-60504/03 Replacement 300 mic pleated galvanised steel element
W-3197 Gasket kit
W-3197V    Viton gasket kit

 

  •  70501/3 can be fitted with a magnetic column to remove ferrous particles. 

 

Install and Maintenance

Installation

Carefully follow the flow direction shown by an arrow on the filter. The filter can be installed in any position although it is recommended to fit it vertically with the bowl pointing downwards in order to facilitate the separation of the water traces and the deposit of the filtered impurities. 

 

Servicing

Cleaning the filter is carried out by unscrewing the central bolt and then unscrewing the bowl. Carefully wash the filtering element with clean diesel, gas-oil or gasoline. Remount the unit and check that the seals are integral and well placed. Paper elements should be replaced as they cannot be reused (see above spares). Water can be drained by opening the bleed screw on the lid and then the water drain at the bottom of the bowl.

See the product service and support page

Technical Spec

 MODEL
FLOW RATE (litres / hour)
ELEMENT
PORT SIZE
DIMENSIONS (mm)
 W70501/006
3000 - 5000
60 mic ss
1" BSP
190 x 255
 W70501/01
3000 - 5000
100 mic ss
1" BSP
190 x 255
 W70501/03
3000 - 5000
300 mic gs
1" BSP
190 x 255
 W70503/006
5000 - 8000
60 mic ss
1½" BSP
190 x 255
 W70503/01
5000 - 8000
100 mic ss
1½" BSP
190 x 255
 W70503/03
5000 - 8000
300 mic gs
1½" BSP
190 x 255

Notes:
Flow rates are approximate
ss = stainless steel  gs = galvanised steel  F = flanged connections

Aluminium filter body and cover- maximum working pressure 4 bar - maximum operating temperature 90°C 

Technical Specification

Maximum operating pressure           2bar
Max operating temp (metal bowl)    90 deg C
Compatible with diesel and heavy oil

 

How to Order

Call or email us to place your order. We accept ALL major credit and debit cards, bank transfer and also PayPal. 

Contact Us TabPhone copy



 

Expert advice

Unsure which spare parts you require? Or if a Separ filter will meet your requirements? 

Talk to our expert team. Call 01923 276 007

swk200010trans

 

Delivery options

We have a wide range of shipping options available to suit your destination and budget.

 

 

Wooden-Crate-psd42799 copy

Contact Us

3 Kingley Park, Station Road, Kings Langley, Herts, WD4 8GW

Tel: +44 (0)1923 276007

Fax: +44 (0)1923 267463

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Here to Help

Product guides

Fuel Specs

Glossary

Selecting a Filter