Welcome to Separ UK

 swk200010transWe are the largest fuel polishing and fuel filtration supplier in Europe, supplying fuel filtration and preservation equipment to the generator, marine, building services, truck, bus, and heavy equipment markets since the 1980s.

 

Need to order spares?

01830 small cropped 2

Please call us on 01923 276 007 or email This email address is being protected from spambots. You need JavaScript enabled to view it.


Contact Us Tab          

SWK2000 Replacing elements and lid seal

 1030NOTE

note icon

Before any servicing is carried out, please ensure the system is isolated from the fuel supply (close any ball valves). The internal valve should be closed for this service, but must be re-opened before the unit is restarted (page 15).

 

You will need:

 spanner
  • Spanner
  • Gloves
  • Replacement element
  • Gasket set
  • Flat head screwdriver
 

Instructions

1. Turn off the power supply to your machine- talk to your internal representative if required.

 

2. Close all ball valves to isolate the system from the fuel supply. Talk to your internal representative if required.

 

3. Locate the internal service ball valve and turn the valve from open to close.

 valve openvalve closed

4. unscrew the 4 lid screws with the spanner and alrenate between the screws as there will be pressure from the internal spring.

 Top of grey filter web

5. remove the lid and inspect the gasket. If replacement is required, follow instructions from step 6, if not, skip to step 9. For spares, please see our spares page.

Separ grey filter top and gasket web

 

6. Remove the gasket from the grey filter lids using a flat head screwdriver to prise it out.

 

7. clean any residue on the lid where the gasket was.

 

8. Install the new gasket, ensuring it is sitting correctly in the given area.

 

9. Remove the spring cassette

Spring Cassette web



 

 

 

10. remove the old filter element

11. fit the new element using the handle at the top.

12. Install the spring cassette

13. Replace grey lid on to the filter unit and tighten 4 bolts (6-8nm max)**onto filter lid.

How to Order

Call or email us to place your order. We accept ALL major credit and debit cards, bank transfer and also PayPal. 

Contact Us TabPhone copy



 

Expert advice

Unsure which spare parts you require? Or if a Separ filter will meet your requirements? 

Talk to our expert team. Call 01923 276 007

swk200010trans

 

Delivery options

We have a wide range of shipping options available to suit your destination and budget.

 

 

Wooden-Crate-psd42799 copy

Contact Us

3 Kingley Park, Station Road, Kings Langley, Herts, WD4 8GW

Tel: +44 (0)1923 276007

Fax: +44 (0)1923 267463

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Here to Help

Product guides

Fuel Specs

Glossary

Selecting a Filter